1 - 1006 Congress - OBE Mural Attachments_COA_HLC — original pdf

Backup

CITY OF AUSTIN HISTORIC LANDMARK COMMISSION CERTIFICATE OF APPROPRIATENESS Old Bakery & Emporium Mural Wall - Written Scope of Work The following scope of work provides information about a new mural on the south-facing wall of the Old Bakery & Artisan Emporium, located at 1006 Congress Avenue. The Old Bakery building is historically designated on the local, state, and federal levels. On the state level, the building is a State Antiquities Landmark and Recorded Texas Historical landmark. Additionally, the building is a City of Austin Landmark and individually listed on the National Register of Historic Places and is a contributing building to the Congress Avenue National Register Historic District. The building was originally built as a Swedish bakery and has housed several uses over the years since its construction in the late-1800s. Currently, the building is home to a gift shop, museum, and artist gallery for artists over the age of 50 and is currently owned and operated by the City of Austin’s Parks and Recreation Department. The south-facing wall of the Old Bakery building was originally built as an interior party wall shared with the adjacent building. After the demolition of the adjacent building in the late-1960s, the limestone rubble masonry wall was stuccoed and painted over with a neutral gold tone. There are no significant or historic architectural elements on the south facade. In the years since the demolition of the adjacent building and the stuccoing of the new exterior wall, a drainpipe, light fixture, and ADA compliant handrail have been mounted to the wall face. Today, the stucco finish is in fair-to-poor condition with many visible cracks and discoloration in the painted surface. There are several unused penetrations and metal hardware in the wall’s surface from previous signage and modifications (see attached images for reference). Per feedback received during a consultation meeting with THC staff on May 22, 2023, the mural will have a minimum five-foot setback from the east-facing wall to maintain a corner visual with the main east elevation of today’s condition. The mural will only be located on the south-facing wall to comply with the City of Austin’s mural guidelines that prohibits murals facing onto the Congress Avenue, which is a National Register Historic District. There is a precedent set for murals on the side walls of buildings within the Congress Avenue National Register Historic District, such as Mexic-Arte’s north-facing Mero Muro Wall located at 419 Congress Avenue and The Contemporary’s south-facing mural wall located at 700 Congress Avenue. The project has secured a State Antiquities Landmark permit from the Texas Historical Commission (Permit #HS 1282). The mural will be the first in a rotating mural program and will be installed for 3-5 years. The mural design will be at the discretion of the artist but will be grounded in the Old Bakery Engagement & Vision Report (see attached), in which a vision for the mural was co-created by input received from over 1,000 community members. The year-long public engagement process focused on the history of the Old Bakery building and the land on which the building sits. This mural presents the opportunity to celebrate the untold narratives of Austin and will continue to enhance the cultural, historic, and creative impact of the Old Bakery building and the Congress Avenue National Register Historic District. This project has been identified as rehabilitation project. While a new mural installation is not architectural in a traditional manner, it is a temporary and reversible alteration of the painted finish that is compatible with the use of the Old Bakery as a cultural destination for arts and artisan crafts but does not impact the portions and features of the property which convey its historical, architectural, and cultural values (i.e., the exterior east- facing wall, interior oven). The artist for the mural, selected by an independent panel of experts, is a fifth generation Austinite with large- scale mural painting experience throughout Texas. The artist will approach the mural installation in three phases: 1) wall preparation, 2) mural installation, and 3) mural overcoats. Page 1 of 2 1. Wall Preparation. To preserve the existing wall surface and structure, the artist will focus on water diversion and surface preparation. Surface cracks and penetrations will be reviewed, scrapped, and sealed prior to work. The surfaced will be washed with MuralColors’ Mural Wash*, a plant-based detergent, to remove any oils, pollutants, and efflorescence. Once the wall is dried thoroughly, the artist will install a coat of MuralColors’ ColorShield*, a consolidant, on the wall. The artist will leave a 3-inch unprimed air gap at the bottom of the wall to promote moisture breathability and to prevent paint delamination in the future. Once the ColorShield is dried, the artist will apply two coats of MuralColors’ Mural Primer*, a high-density waterborne acrylic, which contains an adhesion promoter with titanium pigment for proper surface preparation. 2. Mural Installation. The artist will produce the mural using fine art aerosol paints and MuralColors’ Mural Acrylics.* These acrylics chemically fuse to each paint layer and contain no VOCs. They are developed to outperform commercial paints in outdoor environments, reduce maintenance costs, and resists fading, efflorescence and paint peeling. 3. Mural Overcoats. MuralColor’s ColorShield will be applied to the finished mural first. This protective coating protects and expands the lifespan of the paint by binding and fusing paint layers together while maintaining breathability and enhancing the paint’s flexibility. A Graffiti Protective Coat will be the final coat applied to the finished mural to protect against spray paint, ink, pollution, and grime. This coating is a water-based, all-weather, long-term sacrificial protection that prevents graffiti from penetrating into the substrate. *Material Safety Data Sheets (MSDS) have been included in the submittal Page 2 of 2 +- 45'-4" SOUTH WALL (VIF) +- 40'-4" PAINTABLE MURAL AREA (VIF) VIF +- 5'-0" SETBACK HISTORIC EAST FACING MASONRY WALL AND PORTICO TO REMAIN AS IS. EXISTING BUILDING TO REMAIN AS IS. PROPOSED MURAL TO BE PAINTED ON SOUTH FACING WALL (SEE ELEVATION DETAIL). ) F I V ( " 3 - ' 0 2 - + OLD BAKERY & ARTISAN EMPORIUM SITE PLAN N Note: The south facing wall of the Old Bakery Building was an interior party or dividing wall before the adjacent building was demolished and the empty space was converted into a parklet. There are no significant or historic architectural details along the south facing wall. SCALE: 332" = 1'-0" +- 48'-4" PAINTABLE MURAL WIDTH (VIF) +- 5'-0" SETBACK HISTORIC EAST FACING MASONRY WALL AND ARCHITECTURAL DETAILS TO REMAIN AS IS. 5FT SETBACK OF UNTREATED EXISTING PAINTED STUCCO WALL, PER THE TEXAS HISTORICAL COMMISSION'S RECOMMENDATIONS. NEW PAINTED MURAL AREA ON EXISTING PAINTED STUCCO FINISH. ORIGINAL PARTY WALL IS LIMESTONE RUBBLE MASONRY. PAINT MATERIALS TO BE DETERMINED BY SELECTED ARTIST. EXISTING PORTICO TO REMAIN AS IS. EXISTING LIGHT FIXTURE I ) F I V ( T H G E H L A R U M E L B A T N A P I " 0 1 - ' 3 3 - + F I V " 7 - ' 5 1 - + F I V " 6 - ' 7 1 - + +- 8'-0" VIF +- 45'-4" VIF OLD BAKERY & ARTISAN EMPORIUM SOUTH WALL ELEVATION NOTE: THE SOUTH FACING WALL OF THE OLD BAKERY WAS AN INTERIOR PARTY WALL BEFORE IT WAS DEMOLISHED AND CONVERTED INTO A PARKLET. THERE ARE NO SIGNIFICANT OR HISTORIC ARCHITECTURAL DETAILS ALONG THE SOUTH FACING FACADE. SCALE: 18" = 1'-0" PROPOSED MURAL AREA Old Bakery Mural Project Existing Conditions and Proposed Mural Location 1 South Facing Wall-Existing Conditions 2 Proposed Mural Location TEXAS HISTORICAL COMMISSION ANTIQUITIES PERMIT: HISTORIC BUILDINGS AND STRUCTURES PERMIT #HS 1282 This permit is issued by the Texas Historical Commission, hereinafter referred to as the Commission, represented herein by and through its duly authorized and empowered representative. Under authority of the Texas Natural Resources Code, Title 9, Chapter 191, and subject to the conditions hereinafter set forth, this permit is granted for: Rehabilitation To be performed on a designated State Antiquities Landmark known as: Old Bakery, The (Lundberg Bakery) New mural installation on the south-facing wall (formerly an interior party wall) of the building 1006 Congress Ave. Austin, Travis County Owned or controlled by (hereinafter known as the Permittee) Kim McKnight City of Austin Parks and Recreation Department 200 S. Lamar Blvd. Austin, Texas 78704 The architect, engineer, or contractor representing the Permittee is: Dewitt Peart Downtown Austin Alliance Foundation 515 Congress Avenue, Ste. 2150 Austin, Texas 78701 This permit will be in effect for a period of: 1 year And will expire on: April 1, 2025 Work under this permit shall consist of: Preservation of the masonry units followed with application of a mural on the existing exterior wall surface along the south elevation of the Old Bakery. Owner agrees to a five-foot gap from the edge of the building to the start of the mural. Surface cracks and penetrations will be reviewed, scraped, and sealed prior to work. The surfaced will be washed with a product to remove oils, pollutants, and efflorescence. After the wall dries a consolidant will be applied but an air gap will allow moisture breathability. A primer will then be used for surface preparation before creation of the mural using aerosol paint. A special protectant will be applied to the finished mural to help with binding and allow breathability. The process will be finalized by a graffiti protective coat to combat spray paint, ink, pollution, and grime. The project information is based on documentation submitted by the owner on January 26, 2024. Antiquities Permit: Historic Buildings And Structures 1 of 2 DocuSign Envelope ID: 8F91FAC1-0A68-42C6-B527-C2AB3FB726CEThis permit is granted on the following terms and conditions: 1) 1) 2) 3) 6) 7) 8) The Secretary of the Interior’s Standards for the Treatment of Historic Properties (1995 and subsequent revisions) have been adopted by the Commission and shall serve as guidelines for appropriateness of all activities carried out under this permit. This project must be carried out in accordance with the project application approved by the Commission or their duly authorized and empowered representative. Any proposed deviation from the project application must receive the approval of the Commission prior to implementation. If the Permittee fails to comply with any of the Commission’s Rules of Practice and Procedure (Texas Administrative Code, Title 13, Chapter 26) or with any of the specific terms of this permit, or fails to properly conduct or complete this project within the allotted time, the Commission may place the permit on hold or cancel the permit. In the case of ongoing projects, work must cease immediately. The Commission will notify the Permittee of such hold or cancellation by certified mail, return receipt requested. Upon notification of cancellation, the Permittee, project sponsor, project architect or engineer, and professional firm shall remove all construction personnel and equipment from the area or site within 24 hours. A permit, which has been canceled, can be reinstated by the Commission if good cause is shown within thirty (30) days. 4) The Permittee, Architect, or anyone else under contract to the Permittee in the conduct of the activities hereby authorized, must comply with all laws, ordinances, and regulations of the State of Texas and of its political subdivisions including, but not limited to, the Antiquities Code of Texas. 5) Any duly authorized and empowered representative of the Commission may, at any time, visit the site and examine the permit, construction documents, and work. This permit may not be assigned by the Permittee in whole or in part to any other individual, organization, institution, or corporation. The Permittee shall have a copy of this permit available at the site of the project during all working hours. Hold Harmless: The Permittee hereby expressly releases the State, and agrees that Permittee will hold harmless, indemnify, and defend (including reasonable attorney’s fees and costs of litigation) the State, its officers, agents, and employees in their official and/or individual capacities from every liability, loss, or claim for damages to persons or property, direct or indirect, of whatsoever nature arising out of, or in any connection with, any of the activities covered by this permit. 9) Addendum: The Permittee will abide by any addenda hereto attached. Upon a finding that it is in the best interest of the State, this permit is issued on __________________. Bradford Patterson Deputy Executive Director for Preservation Programs Texas Historical Commission Antiquities Permit: Historic Buildings And Structures 2 of 2 DocuSign Envelope ID: 8F91FAC1-0A68-42C6-B527-C2AB3FB726CE3/5/2024Mural Wash SAFETY DATA SHEET Issue Date: 12/01/2022 Revision Date: N/A Version: 1.0 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY UNDERTAKING Product Name Mural Wash™ Surfactant and OverCoat Remover Company MuralColors Inc. 3020 East Las Hermanas Street, Rancho Dominguez, CA 90221 United States of America (USA) hello@muralcolors.com | 323-601-5000 24-Hour Emergency Telephone Number North America Emergency Number: VelocityEHS International Emergency Number: VelocityEHS 1-800-704-9215 Contract Number MIS2420679 +1-360-256-7365 Contract Number MIS2420679 Additional Information: For TDS and SDS Requests, email: hello@muralcolors.com Website: www.MuralColors.com Intended Use: High concentrate biosolvent based soap designed to remove pollutants, soil, and biomatter off of walls and painted murals. Use as is or mix with water 1:1. For use in fine art mural conservation and for use in removing and washing away OverCoat Anti-Graffiti Coating. Use gloves and goggles when handling. 2 HAZARDS IDENTIFICATION NOT REGULATED FOR TRANSPORT Hazard classification Not a hazardous substance or mixture Signal Word: Not Hazardous Hazard Statement: None Precautionary Statements - Prevention: None Hazards Not Otherwise Classified (HNOC): Not applicable 3 COMPOSITION / INFORMATION ON INGREDIENTS Cas No. Chemical Name Trade Secret Non Hazardous Biosolvent Blend 57-55-6 1,2-Propylene glycol 9036-19-5 Polyethylene glycol octylphenyl ether 67-56-1 Methanol Formulas are confidential and proprietary. The product contains no substances known to be hazardous to health in concentrations which need to be taken into account. Weight percent 35.0 - 45.0 30.0 - 40.0 5.0 - 10.0 0 - 0.1 1 Mural Wash Version 1.0 4 FIRST-AID MEASURES SAFETY DATA SHEET Eye Contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes If symptoms persist, call a physician. Skin Contact: Wash off immediately with soap and plenty of water If symptoms persist, call a physician. Inhalation: Remove to fresh air. If symptoms persist, call a physician. Ingestion: Rinse mouth. If symptoms persist, call a physician. Most important symptoms and effects, both acute and delayed Most Important Symptoms and Effects: No information available. Indication of any immediate medical attention and special treatment needed Notes to Physician: Treat symptomatically. 5 FIRE-FIGHTING MEASURES Suitable extinguishing media: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Extinguishing media which must not be used for safety reasons: None Specific hazards arising from the chemical: None. Protective equipment and precautions for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. 6 ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Personal Precautions: Use personal protective equipment as required. Environmental Precautions: Do not allow into any sewer, on the ground or into any body of water. Methods of Containment: Prevent further leakage or spillage. Methods of Cleaning Up: Soak up and transfer to properly labeled containers. 7 HANDLING AND STORAGE Precautions for Safe Handling: Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required. 2 Mural Wash Version 1.0 SAFETY DATA SHEET Storage: Keep containers tightly closed in a dry, cool and well-ventilated place. Keep from freezing. Incompatible Products: None known based on information supplied. 8 EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Guidelines This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies. Appropriate Engineering Controls Engineering Measures: Shower. Eye wash stations. Personal Protective Equipment Eye/Face Protection: Use safety goggles. Skin and Body Protection: Long sleeved clothing. Protective gloves. Respiratory protection: If brushing or rolling, no special protective equipment is required. If sprayed, use respiratory protection such as a mask. Hygiene Measures: Handle in accordance with good industrial hygiene and safety practice. 9 PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties Physical State: Liquid Gel Appearance: Clear Odor Threshold: No data available Freezing Point: ≈ 32 ºF Translucent Clear Fruity No data available No data available > 212 ºF Color: Odor: pH: Boiling Point: Flash Point: Evaporation Rate: No data available Flammability (solid, gas): Not flammable 3 SAFETY DATA SHEET Mural Wash Version 1.0 Upper Explosion Limit: No data available Vapor Pressure: No data available Relative Vapor Density: No data available Relative Density: ≈ 1 Density: ≈ 8.00 lbs / gal Water Solubility: No data available Solubility in other solvents: No data available Partition coefficient: Auto-ignition temperature: No data available None Thermal decomposition: No data available Viscosity Viscosity, Dynamic: ≈ 2000 cps 10 STABILITY AND REACTIVITY Chemical stability: Stable under recommended storage conditions Possibility of hazardous reactions: None under normal processing Conditions to avoid: Do not freeze Incompatible materials: None known based on information supplied Hazardous decomposition products: None known based on information supplied 11 TOXICOLOGICAL INFORMATION Information on likely routes of exposure Inhalation: Not an expected route of exposure Eye Contact: No known effect based on information supplied Skin Contact: No known effect based on information supplied Ingestion: No known effect based on information supplied Acute Toxicity: Component Information: No information available Information on Toxicological Effects 4 Mural Wash Version 1.0 Symptoms: None known SAFETY DATA SHEET Delayed and immediate effects as well as chronic effects and long-term exposure Carcinogenicity: Contains no ingredients above reportable quantities listed as a carcinogen Irritation: None known based on information supplied Sensitization: None known based on information supplied Mutagenic Effects: None known based on information supplied. Reproductive Toxicity: None known based on information supplied. STOT - Single Exposure: None known based on information supplied. STOT - Repeated Exposure: None known based on information supplied. Aspiration Hazard: None known based on information supplied. 12 ECOLOGICAL INFORMATION Persistence and degradability: Persistence and degradability is not known based on information supplied. Bioaccumulative potential: Bioaccumulation potential is not known based on information supplied. Mobility in soil: The mobility of this product has not been determined. Other adverse effects Endocrine system: Contains no substances above reportable quantities listed as an endocrine disruptor. 13 DISPOSAL CONSIDERATIONS Waste treatment methods: This material, as supplied, is not a hazardous waste according to Federal regulations (40 CFR 261). This material could become a hazardous waste if it is mixed with or otherwise comes in contact with a hazardous waste, if chemical additions are made to this material, or if the material is processed or otherwise altered. Consult 40 CFR 261 to determine whether the altered material is a hazardous waste. Consult the appropriate state, regional, or local regulations for additional requirements. Appropriate packaging: Dispose of in accordance with local regulations. 14 TRANSPORT INFORMATION DOT (Department of Transportation): Not regulated as a dangerous good IATA (International Air Transport Association): Not regulated as a dangerous good IMDG-Code: Not regulated as a dangerous good 5 Mural Wash Version 1.0 15 REGULATORY INFORMATION SAFETY DATA SHEET The following component(s) are on the TSCA 12(b) Export Notification List: Components TSCA 12(b) Section Alcohols, C>14, ethoxylated Section 5 California Prop. 65 Based on the information available from raw material suppliers and to the best of our knowledge, this product would not result in an exposure to any listed chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Pennsylvania Any material listed as "Not Hazardous" in the CAS REG NO. column of SECTION 2, Composition/Information On Ingredients, of this MSDS is a trade secret under the provisions of the Pennsylvania Worker and Community Right-to-Know Act. United States TSCA Inventory (TSCA) All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory. Clean Air Act This product does not contain any substances regulated as hazardous air pollutants (HAPS) or volatile organic compounds (VOCs) under Section 112 of the Clean Air Act Amendments of 1990. Clean Water Act This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42). SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372. SARA 311/312 Hazard Categories Acute Health Hazard: No Chronic Health Hazard: No Fire hazard: No Sudden release of pressure hazard: No Reactive Hazard: No CERCLA This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material. 6 Mural Wash Version 1.0 16 OTHER INFORMATION SAFETY DATA SHEET Product is supplied as is. The end user assumes all responsibilities. ALWAYS TEST BEFORE USE. Product Type: High Concentration Surfactant VOC Content: 0 g/l The information accumulated is based on the data of which we are aware and is believed to be correct as of the date hereof. Since this information may be applied under conditions beyond our control and with which we may be unfamiliar and since data made become available subsequently to the date hereof, we do not assume any responsibility for the results of its use. Recipients are advised to confirm in advance of need that the information is current, applicable, and suitable to their circumstances. MuralColors Inc makes no warranties or guarantees whether expressed or implied, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. The purchase of this item is subject to the terms and conditions of an “AS IS” sale. In no event shall MuralColors Inc be liable for any direct, indirect, special, or consequential damages in connection with or arising out of the performance, use, or misuse of any portion of the purchased item. MuralColors is a Woman Owned and Minority Owned Small Business located in Los Angeles, CA. We create durable artist and architectural materials that reduce the impact of plastics on the environment. 7 COLORSHIELD SAFETY DATA SHEET Issue Date: 5/15/2022 Revision Date: N/A Version: 1.0 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY UNDERTAKING Product Name ColorShield™ Paint Preserver Company MuralColors Inc. 3020 East Las Hermanas Street, Rancho Dominguez, CA 90221 United States of America (USA) hello@muralcolors.com | 323-601-5000 24-Hour Emergency Telephone Number North America Emergency Number: VelocityEHS International Emergency Number: VelocityEHS 1-800-704-9215Contract Number MIS2420679 Additional Info: Intended Use: +1-360-256-7365 Contract Number MIS2420679 For SDS Requests, email: hello@muralcolors.com Website: www.MuralColors.com Protective Mural and Paint Consolidant for UV protection, preservation, and restoration. Fine Art, Mural and Decorative Arts Coating. Always test before use. 2 HAZARDS IDENTIFICATION NOT REGULATED FOR TRANSPORT Hazard classification Not a hazardous substance or mixture Label elements Hazard pictograms Signal Word: WARNING! Hazard Statement: H361 Contains trace amounts of Toluene (<= 0.004%), which is suspected of damaging fertility or the unborn child. H332 Harmful if inhaled H335 May cause respiratory irritation. H336 May cause drowsiness or dizziness Precautionary Statements: Prevention P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. No smoking. P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking. P233 Keep container tightly closed. P241 Use explosion-proof electrical/ ventilating/ lighting equipment. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P261 Avoid breathing dust, fumes, gas, mist, vapors, spray. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves, eye protection, face protection. 1 SAFETY DATA SHEET COLORSHIELD Version 1.0 Response P308 + P313 P304 + P340 + P312 P370 + P378 IF exposed or concerned: Get medical advice/ attention. IF inhaled: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. Storage P403 + P233 + P235: Store in a well-ventilated place. Keep the container tightly closed. Keep cool. Store locked up. P405 Disposal P501 Dispose of contents/ container at an approved waste disposal plant. 3 COMPOSITION / INFORMATION ON INGREDIENTS Cas No. Chemical Name Weight percent 41556-26-7 bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate (UV Light Stabilizer) 82919-37-7 1,2,2,6,6,-pentamethyl-4-piperidyl sebacate (Hindered Amine Light Stabilizer) < 0.17 Trade Secret Proprietary Solvent Blend 7732-18-5 Water Formulas are confidential and proprietary. 4 FIRST-AID MEASURES ≥ 84.0 <10.0 < 0.17 General Advice: Always use protective masks, gloves, and goggles. Move out of dangerous area. Show this safety data sheet to the doctor in attendance. Do not leave the individual unattended. If inhaled: Move to fresh air. If exposure is significant, consult a physician. If unconscious, place in a recovery position and seek medical advice. In case of skin contact: If on skin, wash with water and soap. If skin irritation persists, call a physician. . In case of eye contact: Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist. If swallowed: Keep respiratory tract clear.Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Do not induce vomiting without medical advice. 5 FIRE-FIGHTING MEASURES General fire hazards: Do not allow run-off from fire fighting to enter drains or water Extinguishing: Carbon dioxide (CO2). Alcohol-resistant foam. Dry chemical. Foam. 2 COLORSHIELD Version 1.0 SAFETY DATA SHEET Unsuitable Extinguishing Media: High Volume Water Jet Exposure Hazards: Carbon oxides and unburned hydrocarbons (smoke). Irritating fumes or substances may form. Nitrogen oxides (NOx). Special fire fighting procedures: Use a water spray to cool fully closed containers. Protective Equipment for firefighting: Wear self-contained breathing apparatus for firefighting if necessary. Use personal protective equipment. Further Information: Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. For safety reasons in case of fire, cans should be stored separately in closed containments. 6 ACCIDENTAL RELEASE MEASURES Personal Precautions: Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Do not store at high temperatures and pressure can accumulate in sealed containers.. Environmental Precautions: Do not discharge into drains/surface waters/groundwater. Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities Methods for Cleaning Up: Spills should be contained, solidified, and placed in suitable containers for disposal. Floor may be slippery; use care to avoid falling. Eliminate all ignition sources. Ventilate the area. Transfer spilled material to suitable container for recovery or disposal. Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local/national regulations (see section 13). Keep in suitable, closed containers for disposal. 7 HANDLING AND STORAGE Advice on protection against fire and explosion: Take normal measures for preventive fire protection. Do not spray on a naked flame or any incandescent material. Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges. Precautions for Safe Handling: Smoking, eating and drinking should be prohibited in the application area. Avoid exposure - obtain special instructions before use. Do not breathe vapors/dust. Provide sufficient air exchange and/or exhaust in work rooms. Dispose of rinse water in accordance with local and national regulations. Store in a cool, dry, well ventilated place. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Keep the container tightly closed. Static charges can accumulate: use bonding and grounding between transfer equipment and receiving containers and for any other operations capable of generating static electricity. Storage: No smoking. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions. Segregate from food and animal feeds. Storage period 18-24 months. Material can burn. 8 EXPOSURE CONTROLS / PERSONAL PROTECTION 3 COLORSHIELD Version 1.0 SAFETY DATA SHEET Components with workplace control parameters Cas No. Components Value type (Form of exposure) Control parameters/ Permissible concentration Basis Trade Secret Proprietary Solvent Blend TWA TWA TWA TWA TWA 200 ppm 200 ppm 200 ppm 950 mg/m3 200 ppm 950 mg/m3 200 ppm 950 mg/m3 US WEEL ACGIH NIOSH REL OSHA Z-1 OSHA P0 Personal protective equipment Eye protection: Use close fitting safety goggles or glasses with side shields. Respiratory protection: General and local exhaust ventilation is recommended to maintain vapor exposures below recommended limits. Where concentrations are above recommended limits or are unknown, appropriate respiratory protection should be worn. Follow OSHA respirator regulations (29 CFR 1910.134) and use NIOSH/MSHA approved respirators. Protection provided by air purifying respirators against exposure to any hazardous chemical is limited. Use a positive pressure air supplied respirator if there is any potential for uncontrolled release, exposure levels are unknown, or any other circumstance where air purifying respirators may not provide adequate protection. Hand protection Remarks: The suitability for a specific workplace should be discussed with the producers of the protective gloves. Eye protection: Eye wash bottle with pure water. Skin and body protection: Impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the workplace. Hygiene measures: When using, do not eat or drink. When using, do not smoke. Wash hands before breaks and at the end of the day. 9 PHYSICAL AND CHEMICAL PROPERTIES Appearance: Liquid Clear, Colorless Mild, Lightly Fruity Color: Odor: pH: Odor Threshold: No data available 5.5 - 6.5 @ 25 - 30 ºC (77 - 86 ºF) 4 SAFETY DATA SHEET COLORSHIELD Version 1.0 Freezing Point: No data available Boiling Point: Flash Point: No data available >230ºF Evaporation Rate: No data available Flammability (solid, gas): No data available Upper Explosion Limit: No data available Vapor Pressure: < 0.1 mm Hg at 20°C - LVP Exempt Relative Vapor Density: No data available Relative Density: 0.98 @ 20 ºC (68 ºF) Reference substance: (water = 1) Density: 0.98 g/cm3 @ 20 ºC (68 ºF) Water Solubility: No data available Solubility in other solvents: No data available Partition coefficient: Auto-ignition temperature: No data available 203 - 204 °C 760 mmHg Thermal decomposition: No data available Viscosity Viscosity, Dynamic: 2.4 mm2/s @ 25 °C (77 °F) 10 STABILITY AND REACTIVITY Reactivity: No dangerous reaction known under conditions of normal use. Chemical stability: Stable under normal conditions Conditions to avoid: Keep away from heat, flame, sparks and other ignition sources. Avoid excessive temperatures. Incompatible materials: Strong acids, bases, nitrates, strong oxidizing agents, acid chlorides, acid anhydrides, bases, alkali metals, reducing agents, alkaline earth metals, inorganic nitrides. Hazardous decomposition products: Thermal decomposition may yield acrylic monomers. 11 TOXICOLOGICAL INFORMATION Acute Toxicity Product: Acute oral toxicity: Acute toxicity estimate: > 5,000 mg/kg 5 COLORSHIELD Version 1.0 SAFETY DATA SHEET Acute inhalation toxicity:Acute toxicity estimate: > 40 mg/l Exposure time: 4 h Test atmosphere: vapor Acute dermal toxicity Acute toxicity estimate: > 5,000 mg/kg Carcinogenicity IARC OSHA NTP ACGIH No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. No component of this product present at levels greater than or equal to 0.1% is on OSHA’s list of regulated carcinogens. No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcino- gen by ACGIH. 12 ECOLOGICAL INFORMATION Ecotoxicity No data available Persistence and degradability No data available Bioaccumulative potential No data available Mobility in soil No data available Other adverse effects Product: Ozone-Depletion Potential Regulation: 40 CFR Protection of Environment; Part 82 Protection of Stratospheric Ozone - CAA Section 602 Class I Substances Remarks: This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B). Additional ecological information An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. Unprofessional disposal in liquid form may be harmful to aquatic life with long lasting effects. 13 DISPOSAL CONSIDERATIONS Waste treatment methods: Dispose of in accordance with all applicable local, state and federal regulations. Do not discharge into drains/surface waters/groundwater. 6 COLORSHIELD Version 1.0 SAFETY DATA SHEET Appropriate packaging: Empty containers should be taken to an approved waste handling site for recycling or disposal. Dispose only at paint recycling facilities. Do not reuse empty containers. Do not burn, or use a cutting torch on the empty container. 14 TRANSPORT INFORMATION DOT (Department of Transportation): Not regulated as a dangerous good IATA (International Air Transport Association): Not regulated as a dangerous good IMDG-Code: Not regulated as a dangerous good Special Notes: The flash point for this material is greater than 200 F (93 C). Therefore, in accordance with 49 CFR 173.150(f) non-bulk containers (<450L or <119 gallon capacity) of this material may be shipped as non-regulated when transported solely by land, as long as the material is not a hazardous waste, a marine pollutant, or specifically listed as a hazardous substance. IMDG-Code: Not regulated as a dangerous good 15 REGULATORY INFORMATION EPCRA - Emergency Planning and Community Right-to-Know Act CERCLA Reportable Quantity California Prop. 65 WARNING: This product can expose you to chemicals including Dimethyl Sulfate, Ethylene glycol, 2- Ethoxyethanol, Ethyl acrylate, Ethylbenzene, which is/are known to the State of California to cause cancer, and Toluene, which is/are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Pennsylvania Any material listed as "Not Hazardous" in the CAS REG NO. column of SECTION 2, Composition/Information On Ingredients, of this MSDS is a trade secret under the provisions of the Pennsylvania Worker and Community Right-to-Know Act. United States TSCA Inventory (TSCA) All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory. Clean Air Act The following chemical(s) are listed as HAPs under the U.S. Clean Air Act, Section 12 (40 CFR 61): Diethylene glycol mono ethyl ether This product does not contain any chemicals listed under the U.S. Clean Air Act Section 112(r) for Accidental Release Prevention (40 CFR 68.130, Subpart F). The following chemical(s) are listed under the U.S. Clean Air Act Section 111 SOCMI Intermediate or Final VOC's (40 CFR 60.489): Diethylene glycol mono ethyl ether Clean Water Act This product does not contain any Hazardous Chemicals listed under the U.S. CleanWater Act, Section 311, Table 117.3. 7 COLORSHIELD Version 1.0 SAFETY DATA SHEET This product does not contain any toxic pollutants listed under the U.S. Clean Water Act Section 307 16 OTHER INFORMATION Product is supplied as is. The end user assumes all responsibilities. ALWAYS TEST BEFORE USE. Product Type: Fine Art, Mural, and Decorative Arts Coating Low Vapor Pressure VOC: Vapor Pressure < 0.1 mm Hg at 20°C The resin used in ColorShield contains trace amounts of toluene (<= 0.004%), which is part of our supplier's raw material manufacturing process. Always use protective masks and equipment when working with any chemical or artistic material. The information accumulated is based on the data of which we are aware and is believed to be correct as of the date hereof. Since this information may be applied under conditions beyond our control and with which we may be unfamiliar and since data made become available subsequently to the date hereof, we do not assume any responsibility for the results of its use. Recipients are advised to confirm in advance of need that the information is current, applicable, and suitable to their circumstances. MuralColors Inc makes no warranties or guarantees whether expressed or implied, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. The purchase of this item is subject to the terms and conditions of an “AS IS” sale. In no event shall MuralColors Inc be liable for any direct, indirect, special, or consequential damages in connection with or arising out of the performance, use, or misuse of any portion of the purchased item. MuralColors is a Woman Owned and Minority Owned Small Business located in Los Angeles, CA. We create durable artist and architectural materials that reduce the impact of plastics on the environment. 8 Acrylic Mural Paint SAFETY DATA SHEET Issue Date: 12/01/2022 Revision Date: N/A Version: 1.0 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY UNDERTAKING Product Name Acrylic Mural Paint Company MuralColors Inc. 3020 East Las Hermanas Street, Rancho Dominguez, CA 90221 United States of America (USA) hello@muralcolors.com | 323-601-5000 24-Hour Emergency Telephone Number North America Emergency Number: VelocityEHS International Emergency Number: VelocityEHS 1-800-704-9215 Contract Number MIS2420679 +1-360-256-7365 Contract Number MIS2420679 Additional Information: For TDS and SDS Requests, email: hello@muralcolors.com Website: www.MuralColors.com Intended Use: High performance water-based acrylic paint designed for fine art exterior, outdoor painted murals. MuralColors Acrylic Mural Paint is a Zero VOC paint. 2 HAZARDS IDENTIFICATION NOT REGULATED FOR TRANSPORT Hazard classification Not a hazardous substance or mixture Signal Word: Not Hazardous Hazard Statement: None Precautionary Statements - Prevention: None Hazards Not Otherwise Classified (HNOC): Not applicable 3 COMPOSITION / INFORMATION ON INGREDIENTS Individual Colors Anthraquinone Red Benzimidazolone Yellow Bismuth Vanadate Yellow Burnt Sienna Burnt Umber Raw Umber Diarylide Yellow Dioxazine Purple Mars Black Phthalo Blue GS Pyrrole Red Quinacridone Red Raw Sienna Components Not Hazardous Not Hazardous 3 5, 6 5, 6, 7 5, 6, 7 6 4 7 5, 6 Not Hazardous Not Hazardous Not Hazardous 1 Acrylic Mural Paint Version 1.0 Red Oxide Titanium White Yellow Oxide Ultramarine Blue 6 6 1, 2, 8 Not Hazardous SAFETY DATA SHEET Composition and Information of Ingredients Code Composition Max % Weight CAS Number 1 2 3 4 5 6 7 8 Aluminum Hydroxide (26%) Amorphous Silica Bismuth Vanadium Oxide Copper Crystalline Silica Iron Oxide Manganese compounds Titanium Dioxide 5 10 22 5 5 25 5 30 1336-21-6 7631-86-9 14059-33-7 7440-50-8 6 mg/M3 15 mg/M3 1 mg/M3 14464-46-1 0.05 mg/M3 1309-37-1 7439-96-5 10 mg/M3 NE 13463-67-7 10 mg/M3 Time Weighted Average Short Term Exposure Limit 35 ppm Acrylic Binder Cas No. Chemical Name 68630-97-7 Poly(oxy-1,2ethanediyl), .alpha.-(3-carboxy-1-oxosulfopropyl)-.omega.-(decyloxy)-, disodium salt Formulas are confidential and proprietary. The product contains no substances known to be hazardous to health in concentrations which need to be taken into account. Additional Information - Applies to Airborne Particles of Respirable Size Only CRYSTALLINE SILICA- IARC Group 1 carcinogen based on sufficient evidence of carcinogenicity in humans and experimental animals through inhalation overexposure. WARNING: This product contains a chemical known to the State of California to cause cancer. (Applies to airborne particles of respirable size only) MANGANESE- Overexposure may affect the Central Nervous System and lungs, resulting in transitory psychosis, tiredness, weakness and pneumonitis. May aggravate pre existing neuralgic conditions. MICA- Can cause slight lung fibrosis and pneumoconiosis. QUINACRIDONES- Overexposure may cause dermatitis. Pigment contains a compound found to be a skin, eye and respiratory irritant. TITANIUM DIOXIDE- Listed by IARC under category 2B, possibly carcinogenic to humans. 5 mg/M3 Weight percent 1.0 2 Acrylic Mural Paint Version 1.0 4 FIRST-AID MEASURES SAFETY DATA SHEET Eye Contact: Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Skin Contact: Wash off with soap and warm water, followed by warm water rinse. Inhalation: Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe fresh air. Allow the victim to rest. Ingestion: Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison center/doctor/physician if you feel unwell. Most important symptoms and effects, both acute and delayed Most Important Symptoms and Effects: Symptoms/effects after eye contact - Eye irritation. Indication of any immediate medical attention and special treatment needed Notes to Physician: Treat symptomatically. 5 FIRE-FIGHTING MEASURES Suitable extinguishing media: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Foam. Dry powder. Carbon dioxide. Water spray. Sand. Unsuitable extinguishing media: Do not use a heavy water stream. Specific hazards arising from the chemical: None. Protective equipment and precautions for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. 6 ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Personal Precautions: Use personal protective equipment as required. Environmental Precautions: Do not allow into any sewer, on the ground or into any body of water. Methods of Containment: Prevent further leakage or spillage. Contain spill. Methods of Cleaning Up: Soak up and transfer to properly labeled containers. Recover material for use or proper disposal. Clean residue with water and mopping. 7 HANDLING AND STORAGE 3 Acrylic Mural Paint Version 1.0 SAFETY DATA SHEET Precautions for Safe Handling: Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required. Do not eat, drink or smoke when using this product. Always wash hands after handling the product. Storage: Keep containers tightly closed in a dry, cool and well-ventilated place. Keep from freezing. Store at 5–30 ºC. This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies. Incompatible Products: Strong bases. Strong acids 8 EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Guidelines Appropriate Engineering Controls Engineering Measures: Shower. Eye wash stations. Personal Protective Equipment Eye/Face Protection: Use safety goggles. Skin and Body Protection: Long sleeved clothing. Protective gloves. Respiratory protection: If brushing or rolling, no special protective equipment is required. This product is not designed for spray applications. Hygiene Measures: Handle in accordance with good industrial hygiene and safety practice. 9 PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties Physical State: Liquid Appearance: Liquid; Varies by Color Odor Threshold: No data available Color: Odor: pH: Freezing Point: Boiling Point: Flash Point: Various Fruity 7 – 9 ≈ 0 ºC ≈ 100 ºC No data available 4 SAFETY DATA SHEET Acrylic Mural Paint Version 1.0 Evaporation Rate: No data available Flammability (solid, gas): Not flammable Upper Explosion Limit: No data available Vapor Pressure: 2.3 kPa at 20degC Relative Vapor Density: No data available Relative Density: ≈ 1 Density: ≈ 1 – 1.1 g/cm^3 Water Solubility: Miscible with water Solubility in other solvents: No data available Partition coefficient: Auto-ignition temperature: No data available None Thermal decomposition: No data available Viscosity Viscosity, Dynamic: ≈ 20 – 2000 mPas 10 STABILITY AND REACTIVITY Chemical stability: Stable under recommended storage conditions Possibility of hazardous reactions: None under normal processing Conditions to avoid: Do not freeze Incompatible materials: None known based on information supplied Hazardous decomposition products: None known based on information supplied 11 TOXICOLOGICAL INFORMATION Information on likely routes of exposure Inhalation: Not an expected route of exposure Eye Contact: Can cause eye irritation Skin Contact: No known effect based on information supplied Ingestion: No known effect based on information supplied Acute Toxicity: Component Information: No information available 5 SAFETY DATA SHEET Acrylic Mural Paint Version 1.0 Information on Toxicological Effects Symptoms: None known Delayed and immediate effects as well as chronic effects and long-term exposure Carcinogenicity: Contains no ingredients above reportable quantities listed as a carcinogen Irritation: None known based on information supplied Sensitization: None known based on information supplied Mutagenic Effects: None known based on information supplied. Reproductive Toxicity: None known based on information supplied. STOT - Single Exposure: None known based on information supplied. STOT - Repeated Exposure: None known based on information supplied. Aspiration Hazard: None known based on information supplied. 12 ECOLOGICAL INFORMATION Ecology - general: The product is not considered harmful to aquatic organisms or to cause long-term adverse effects in the environment. Persistence and degradability: Persistence and degradability is not known based on information supplied. Bioaccumulative potential: Bioaccumulation potential is not known based on information supplied. Mobility in soil: The mobility of this product has not been determined. Other adverse effects Endocrine system: Contains no substances above reportable quantities listed as an endocrine disruptor. 13 DISPOSAL CONSIDERATIONS Waste treatment methods: This material, as supplied, is not a hazardous waste according to Federal regulations (40 CFR 261). This material could become a hazardous waste if it is mixed with or otherwise comes in contact with a hazardous waste, if chemical additions are made to this material, or if the material is processed or otherwise altered. Dispose of contents/container in accordance with paint disposal regulations. Consult the appropriate state, regional, or local regulations for additional requirements. Appropriate packaging: Dispose of in accordance with local regulations. 14 TRANSPORT INFORMATION DOT (Department of Transportation): Not regulated as a dangerous good 6 Acrylic Mural Paint Version 1.0 SAFETY DATA SHEET IATA (International Air Transport Association): Not regulated as a dangerous good IMDG-Code: Not regulated as a dangerous good 15 REGULATORY INFORMATION The following component(s) are on the TSCA 12(b) Export Notification List: Components None TSCA 12(b) Section N/A California Prop. 65 Based on the information available from raw material suppliers and to the best of our knowledge, this product would not result in an exposure to any listed chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Pennsylvania Any material listed as "Not Hazardous" in the CAS REG NO. column of SECTION 2, Composition/Information On Ingredients, of this MSDS is a trade secret under the provisions of the Pennsylvania Worker and Community Right-to-Know Act. United States TSCA Inventory (TSCA) All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory. Clean Air Act This product does not contain any substances regulated as hazardous air pollutants (HAPS) or volatile organic compounds (VOCs) under Section 112 of the Clean Air Act Amendments of 1990. Clean Water Act This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42). SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372. SARA 311/312 Hazard Categories Acute Health Hazard: No Chronic Health Hazard: No Fire hazard: No Sudden release of pressure hazard: No Reactive Hazard: No CERCLA This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material. 7 Acrylic Mural Paint Version 1.0 16 OTHER INFORMATION SAFETY DATA SHEET Product is supplied as is. The end user assumes all responsibilities. ALWAYS TEST BEFORE USE. Product Type: Acrylic Mural Paint VOC Content: 0 g/l The information accumulated is based on the data of which we are aware and is believed to be correct as of the date hereof. Since this information may be applied under conditions beyond our control and with which we may be unfamiliar and since data made become available subsequently to the date hereof, we do not assume any responsibility for the results of its use. Recipients are advised to confirm in advance of need that the information is current, applicable, and suitable to their circumstances. MuralColors Inc makes no warranties or guarantees whether expressed or implied, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. The purchase of this item is subject to the terms and conditions of an “AS IS” sale. In no event shall MuralColors Inc be liable for any direct, indirect, special, or consequential damages in connection with or arising out of the performance, use, or misuse of any portion of the purchased item. MuralColors is a Woman Owned and Minority Owned Small Business located in Los Angeles, CA. We create durable artist and architectural materials that reduce the impact of plastics on the environment. 8 OVERCOAT UV PAINT PROTECTOR SAFETY DATA SHEET Issue Date: 5/15/2022 Revision Date: N/A Version: 1.0 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY UNDERTAKING Product Name OverCoat™ UV Paint Protector Company MuralColors Inc. 3020 East Las Hermanas Street, Rancho Dominguez, CA 90221 United States of America (USA) hello@muralcolors.com | 323-601-5000 24-Hour Emergency Telephone Number North America Emergency Number: International Emergency Number: VelocityEHS VelocityEHS 1-800-704-9215 Contract Number MIS2420679 +1-360-256-7365 Contract Number MIS2420679 Additional Information: For TDS and SDS Requests, email: hello@muralcolors.com Website: www.MuralColors.com Intended Use: UV light absorber and light stabilizer in a removable semi-sacrificial coating designed for art preservation and graffiti prevention. A Fine Art Protective Coating. For use on its own or over ColorShield. Always test before use. Shake well before use. Store in a cool dark place away from sunlight. 2 HAZARDS IDENTIFICATION NOT REGULATED FOR TRANSPORT Hazard classification Not a hazardous substance or mixture Signal Word: Not Hazardous Hazard Statement: None Precautionary Statements - Prevention: None Hazards Not Otherwise Classified (HNOC): Not applicable 3 COMPOSITION / INFORMATION ON INGREDIENTS Cas No. Chemical Name 7732-18-5 Deionized Water Trade Secret Polymerized Emulsion Blend 124-68-5 2-amino-2-methylpropanol 13463-41-7 Zinc, bis[1-(hydroxy-.kappa.O)-2(1H)-pyridinethionato-.kappa.S2]-, (T-4)- < 1.0 Formulas are confidential and proprietary. The product contains no substances known to be hazardous to health in concentrations which need to be taken into account. 4 FIRST-AID MEASURES Weight percent ≤ 89.0 ≤ 10.0 < 1.0 1 OVERCOAT Version 1.0 SAFETY DATA SHEET Eye Contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes If symptoms persist, call a physician. Skin Contact: Wash off immediately with soap and plenty of water If symptoms persist, call a physician. Inhalation: Remove to fresh air. If symptoms persist, call a physician. Ingestion: Rinse mouth. If symptoms persist, call a physician. Most important symptoms and effects, both acute and delayed Most Important Symptoms and Effects: No information available. Indication of any immediate medical attention and special treatment needed Notes to Physician: Treat symptomatically. 5 FIRE-FIGHTING MEASURES Suitable extinguishing media: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Extinguishing media which must not be used for safety reasons: None Specific hazards arising from the chemical: None. Protective equipment and precautions for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. 6 ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Personal Precautions: Use personal protective equipment as required. Environmental Precautions: Do not allow into any sewer, on the ground or into any body of water. Methods of Containment: Prevent further leakage or spillage. Methods of Cleaning Up: Soak up and transfer to properly labeled containers. 7 HANDLING AND STORAGE Precautions for Safe Handling: Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required. Storage: Keep containers tightly closed in a dry, cool and well-ventilated place. Keep from freezing. 2 OVERCOAT Version 1.0 SAFETY DATA SHEET Incompatible Products: None known based on information supplied. 8 EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Guidelines This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies. Appropriate Engineering Controls Engineering Measures: Shower. Eye wash stations. Personal Protective Equipment Eye/Face Protection: Use safety goggles. Skin and Body Protection: Long sleeved clothing. Protective gloves. Respiratory protection: If brushing or rolling, no special protective equipment is required. If sprayed, use respiratory protection such as a mask. Hygiene Measures: Handle in accordance with good industrial hygiene and safety practice. 9 PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties Physical State: Appearance: Liquid White Odor Threshold: No data available Color: Odor: pH: Freezing Point: Boiling Point: Flash Point: Translucent White No data available 8.5 ≈ 32 ºF ≈ 212 ºF Not flammable Evaporation Rate: No data available Flammability (solid, gas): Not flammable Upper Explosion Limit: No data available 3 SAFETY DATA SHEET OVERCOAT Version 1.0 Vapor Pressure: No data available Relative Vapor Density: No data available Relative Density: ≈ 1 Density: ≈ 8.34 lbs / gal Water Solubility: No data available Solubility in other solvents: No data available Partition coefficient: Auto-ignition temperature: No data available None Thermal decomposition: No data available Viscosity Viscosity, Dynamic: ≈ 1.0016 cps 10 STABILITY AND REACTIVITY Chemical stability: Stable under recommended storage conditions Possibility of hazardous reactions: None under normal processing Conditions to avoid: Do not freeze Incompatible materials: None known based on information supplied Hazardous decomposition products: None known based on information supplied 11 TOXICOLOGICAL INFORMATION Information on likely routes of exposure Inhalation: Not an expected route of exposure Eye Contact: No known effect based on information supplied Skin Contact: No known effect based on information supplied Ingestion: No known effect based on information supplied Acute Toxicity: Component Information: No information available Information on Toxicological Effects Symptoms: None known Delayed and immediate effects as well as chronic effects and long-term exposure 4 OVERCOAT Version 1.0 SAFETY DATA SHEET Carcinogenicity: Contains no ingredients above reportable quantities listed as a carcinogen Irritation: None known based on information supplied Sensitization: None known based on information supplied Mutagenic Effects: None known based on information supplied. Reproductive Toxicity: None known based on information supplied. STOT - Single Exposure: None known based on information supplied. STOT - Repeated Exposure: None known based on information supplied. Aspiration Hazard: None known based on information supplied. 12 ECOLOGICAL INFORMATION Ecotoxicity: 0.00003 % of the mixture consists of component(s) of unknown hazards to the aquatic environment. Persistence and degradability: Persistence and degradability is not known based on information supplied. Bioaccumulative potential: Bioaccumulation potential is not known based on information supplied. Mobility in soil: The mobility of this product has not been determined. Other adverse effects Endocrine system: Contains no substances above reportable quantities listed as an endocrine disruptor. 13 DISPOSAL CONSIDERATIONS Waste treatment methods: This material, as supplied, is not a hazardous waste according to Federal regulations (40 CFR 261). This material could become a hazardous waste if it is mixed with or otherwise comes in contact with a hazardous waste, if chemical additions are made to this material, or if the material is processed or otherwise altered. Consult 40 CFR 261 to determine whether the altered material is a hazardous waste. Consult the appropriate state, regional, or local regulations for additional requirements. Appropriate packaging: Dispose of in accordance with local regulations. 14 TRANSPORT INFORMATION DOT (Department of Transportation): Not regulated as a dangerous good IATA (International Air Transport Association): Not regulated as a dangerous good IMDG-Code: Not regulated as a dangerous good 5 OVERCOAT Version 1.0 15 REGULATORY INFORMATION SAFETY DATA SHEET The following component(s) are on the TSCA 12(b) Export Notification List: Components TSCA 12(b) Section Alcohols, C>14, ethoxylated Section 5 California Prop. 65 Based on the information available from raw material suppliers and to the best of our knowledge, this product would not result in an exposure to any listed chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Pennsylvania Any material listed as "Not Hazardous" in the CAS REG NO. column of SECTION 2, Composition/Information On Ingredients, of this MSDS is a trade secret under the provisions of the Pennsylvania Worker and Community Right-to-Know Act. United States TSCA Inventory (TSCA) All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory. Clean Air Act This product does not contain any substances regulated as hazardous air pollutants (HAPS) or volatile organic compounds (VOCs) under Section 112 of the Clean Air Act Amendments of 1990. Clean Water Act This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42). SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372. SARA 311/312 Hazard Categories Acute Health Hazard: No Chronic Health Hazard: No Fire hazard: No Sudden release of pressure hazard: No Reactive Hazard: No CERCLA This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material. 6 OVERCOAT Version 1.0 16 OTHER INFORMATION SAFETY DATA SHEET Product is supplied as is. The end user assumes all responsibilities. ALWAYS TEST BEFORE USE. Product Type: Water-based Fine Art Mural Protective Coating VOC Content: 0 g/l The information accumulated is based on the data of which we are aware and is believed to be correct as of the date hereof. Since this information may be applied under conditions beyond our control and with which we may be unfamiliar and since data made become available subsequently to the date hereof, we do not assume any responsibility for the results of its use. Recipients are advised to confirm in advance of need that the information is current, applicable, and suitable to their circumstances. MuralColors Inc makes no warranties or guarantees whether expressed or implied, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. The purchase of this item is subject to the terms and conditions of an “AS IS” sale. In no event shall MuralColors Inc be liable for any direct, indirect, special, or consequential damages in connection with or arising out of the performance, use, or misuse of any portion of the purchased item. MuralColors is a Woman Owned and Minority Owned Small Business located in Los Angeles, CA. We create durable artist and architectural materials that reduce the impact of plastics on the environment. 7 Mural Maintenance Plan The Downtown Austin Alliance Mural Maintenance Plan includes regular inspections of the Old Bakery mural wall and necessary upkeep to preserve the mural's condition and aesthetic appeal. The mural maintenance plan is included as part of the Downtown Austin Alliance’s Memorandum of Understanding with the City of Austin Parks and Recreation Department (PARD). Per the Agreement, the Downtown Austin Alliance will oversee mural maintenance up to three years after completion of the mural installation, after which PARD can choose to extend contract or identify a separate maintenance provider. • Location: 1006 Congress Avenue • Wall Dimensions: ~53’-4” x ~33’-10” *Note: Dimensions to be verified in the field (VIF) • Paintable Area: ~48’-4” x 33’-10” *Note: Dimensions to be verified in the field (VIF) • Wall Material/Type: Painted stucco on limestone rubble. 1. REGULAR INSPECTIONS. Conduct routine inspections to identify any signs of damage, fading, or deterioration. A. Service Provider: Downtown Austin Alliance or third-party contract. B. Inspections to follow State of Texas Historical Commission and City of Austin Historic Landmark Commission guidelines. C. Quality check to be performed every month for vandalism and significant damage. Schedule to be determined by service provider and city partners. a) Following inspection, schedule maintenance as needed. 2. CLEANING. Develop a regular mural cleaning schedule to remove dirt, dust, or pollutants. Use appropriate cleaning methods and products recommended for the mural's specific material. A. Service Provider: Downtown Austin Alliance Ambassador Program B. Schedule to be determined by service provider and city partners. 3. PROTECTION. Apply protective coatings or sealants to shield the mural from environmental elements, UV rays, and vandalism. Ensure the chosen products are suitable for the mural's surface. A. Implementation a) Service Provider: The Downtown Austin Alliance Ambassador Program. b) Schedule maintenance, as needed. Maintenance requirements to be determined by the level of mural damage. B. Materials. a) MuralColors ColorShield. A protective coating that protects and expands the lifespan of the paint by binding and fusing paint layers together while maintaining breathability and enhancing the paint’s flexibility. b) UV Protection Coating. Archival Aerosol Varnish MSA with UVLS is formulated with 100% solvent-based, reversible acrylic co-polymer resin. Properly applied, it creates a durable, even film with the same features as GOLDEN brushable MSA varnish plus, excellent wet/dry state clarity. It resists changes in appearance, remains flexible. It has an adjustable fan spray tip for precise application and reduced overspray. Removable for conservation purposes. c) Graffiti Protective Coat. Water-based all-weather, long-term SACRIFICIAL protection, formulated for most types of surfaces. Provides durable protection against spray paint, marker/felt tip pens, pollution, and grime. Also provides protection against salt and sea-type moisture. i. When correctly applied, life expectancy against graffiti is generally 7 years but it can be effective up to 10 years. Prevents graffiti from penetrating into the substrate. ii. The surface must be re-protected following graffiti removal which can be done immediately to a damp (not wet) surface. This anti-graffiti coating is readily biodegradable according to OECD test 302 B. iii. Reapplication of protective coat is included, as needed. 4. REPAIRS. Promptly address any damages, such as cracks, peeling paint, or vandalism. Consult with a professional mural artist or conservator for restoration work if needed. a) Service Provider: Downtown Austin Alliance Ambassador Program and/or A. Implementation. Artist. b) Artist to be paid by the area of repair at a rate of Twenty Dollars ($20) per square B. Overall damage protection same stipulations apply. Same rules of mural preservation and foot of repaired area. protection. Note: Specific maintenance requirements may vary depending on the mural's size, location, wall material, and environmental factors. It is advisable to consult with mural experts or conservators for personalized recommendations based on specific situations. WRITING ON THE WALLS Engagement & Vision Report OLD BAKERY MURAL WALL - AUGUST 2023 - 2 | WRITING ON THE WALLS ABOUT THE PROJECT The Old Bakery & Artisan Emporium is a historic Facing Old Bakery Park is a bare, three-story wall, building located in downtown Austin at the north- which originally functioned as an interior dividing west corner of Congress Avenue and 10th Street. wall before the demolition of the adjacent buildings While the main floor is a shop filled with local artisan in the 1950s - 1960s. In Spring 2022, APF, the City of goods, the upstairs houses a gallery, featuring artists Austin Parks and Recreation Department and the Old over the age of 50, and an exhibit highlighting Austin’s Bakery & Emporium once again partnered with the Swedish-immigrant history through the Lundberg- Downtown Alliance to revitalize the space through Maeriki Historical Collection. Adjacent to the building Writing on the Walls (WOW), a program that curates is Old Bakery Park, which was transformed in 2014 public art and programming in downtown Austin. through a partnership of the Downtown Austin Through this program, a new mural on the south- Alliance, Austin Parks Foundation (APF) and the City facing wall of the bakery will be developed with of Austin. The park was home to the iconic Thai food the community alongside a series of public space truck, My Thai Mom, which occupied the space for enhancements and programming options in Old several years before closing in Fall 2022. Bakery Park. History of the Old Bakery Site Indigenous History African-American Stories Immigration Architectural History n o i t a v r e s e r P Reconciliation PHOTO EDITED; PHOTO CREDIT: TONKAWA TRIBE, WWW.TONKAWATRIBE.COM/HISTORY.HTML PHOTO EDITED; AUSTIN HISTORY CENTER, AUSTIN PUBLIC LIBRARY PHOTO EDITED; PHOTO CREDIT: WWW.AUSTINTEXAS.GOV/PAGE/LUNDBERG-BAKERY Restorative Justice PHOTO EDITED; AUSTIN HISTORY CENTER, AUSTIN PUBLIC LIBRARY Local Entrepreneurship PRE-1800S LATE 1800S 1876-1936 1963 Old Bakery and the City of Austin reside on the traditional territory and homelands of the Tonkawa, Comanche, Lipan Apache, Coahuiltecan and Jumanos Peoples. The Old Bakery project acknowledges the ancestors of the land and strives to honor the Indigenous peoples and their histories. In response to slavery being outlawed in 1865, Texas landowners rebranded slavery through laws known as ‘Black Codes.’ Black Codes imposed prison sentences on African Americans for petty crimes, then leased out inmates to work on projects. The prosperous nature of the Capitol Complex and surrounding area exist in part because of racist laws and this new form of slavery.1 “The Old Bakery was built in 1876 by Swedish immigrant Charles Lundberg. In 1906, Lundberg sold his bakery to his young Swiss apprentice and the newly-named Maerki Baking Company continued to be a cornerstone of the Austin community until the business closed in 1936. The giant oven and the wooden baker’s spade remain as reminders of the building’s story.”2 “After the Maerki Baking Company shuttered its doors [in 1936], The Old Bakery & Emporium building was used for a number of other businesses and changed hands frequently until it was rescued from demolition in 1963 by the combined efforts of the Austin Heritage Society [now known as Preservation Austin] and the Junior League, who offered $12,500 for restoration.” 2 References: 1. Groetzinger, K. (2019, March 26) Civil Rights Activist Push Lawmakers to Confront Texas’ Dark History of Convict Leasing. The Texas Observer. https://www.texasobserver.org/civil-rights-activists-push-lawmakers-to-confront-texas-dark-history-of-convict-leasing/ 2. Lundberg Bakery. (n.d.). Lundberg-Maerki Historical Collection. City of Austin. https://www.austintexas.gov/page/lundberg-bakery. 3. Ladies of the Club. (n.d.) Texas’s First Ladies. Austin History Center. https://library.austintexas.gov/ahc/ladies-club-texas-first-ladies. To honor the historical importance of the building and the public-nature of the park, the space enhancements and mural curation process included a robust one-year community engagement plan to curate a vision for the mural and define how the community would like to utilize the park. Old Bakery’s history became the cornerstone of the engagement process by honoring the native ancestors of the land, acknowledging the impact of slavery and segregation in the Capitol area, celebrating Swedish immigration and entrepreneurship, and highlighting the architectural history of the bakery. The timeline below, used throughout the public engagement process, reflects the history and enduring themes that continue to influence Austin today. Civic Protest Social Services Arts & Culture H P A R G O T O H P . I I N O T C E L L O C E V T A G E N N A M S E T A T S I N A C R E M A N T S U A I , 0 1 - 2 5 1 3 8 - 3 7 - S ; I D E T D E O T O H P . S E K N A L M O T Y B Women’s Empowerment PHOTO EDITED; PHOTO CREDIT: UNITED FARM WORKERS Change Making Senior Employment K O O B E C A F Y R E K A B D L O : I T D E R C O T O H P ; I D E T D E O T O H P “The Old Bakery & Emporium opened in October of 1976, as a co-sponsored project of the Senior Programs Section of the Austin Parks and Recreation Department and Mrs. Briscoe’s [pictured above] First Lady’s Volunteer Program of the Texas Center for Volunteer Action.”2 Congress Ave and Old Bakery serve as active spaces for Texas change-makers. From the United Farm Workers’ march in 1966 to the Black Lives Matters protests of 2020, the area has been central to civic advocacy. Old Bakery remains an influential space for social movements today. “Today, the Old Bakery & Emporium functions as an art gallery, artisan emporium, visitor and information center, and historical center that celebrates not only Austin’s immigrant history, but also the diversity and artistic vision of artisans over the age of fifty.”2 WRITING ON THE WALLS | 3 THE PARTNERS ABOUT WRITING ON THE WALLS Writing on the Walls, a program of the Downtown Austin Alliance, curates collaborative public art installations and events celebrating art, diversity and public spaces in downtown Austin. Launched in March 2020, the program collaborates with artists, community members and partners to enhance and improve public spaces that on the Walls provides artists with opportunities to create beautiful public art and empowers Austinites to get involved in the process of selecting the art they’d like to see in their city. Community- driven initiatives through Writing on the Walls create spaces that celebrate the spirit of Austin. 1976 1940’S - TODAY 1980’S - TODAY uplift the community. Writing 2 online surveys 350+ participants 4 pop-ups 500 project flyers 2 public events 750+ participants 5 group conversations 50+ participants 4 | WRITING ON THE WALLS PUBLIC ENGAGEMENT BY THE NUMBERS Meeting people where they are Engagement commenced in project and participate in a hands- Fall 2022 with a virtual survey to on survey (Image 1). The activation gauge public interest and educate remained on the site through the the community on the history of week of SXSW to gain additional the bakery and site. To promote input from downtown visitors the survey, over 500 bilingual (Image 3). flyers were handed out at events throughout Austin (Image 2). In addition to broad public input, the project team gathered a In December 2022, the survey diverse group of creatives, art feedback culminated at the educators, public space leaders, Downtown Alliance’s annual preservation experts and Holiday Stroll. This public event cultural pillars to advise on the highlighted the potential of the engagement outreach, artist mural wall through a downtown selection process and mural mural coloring book and uplifted implementation. Over the course the feedback received in the of five small-group Community survey. At the event, community Table Conversations, more than members co-designed mural 50 participants volunteered their concepts with local artist, time to steer the project process RichesArt, who projected the ideas and mural vision (Image 4). onto the blank wall (Image 5). Participation was promoted The second bilingual survey throughout the engagement launched March 2023 in tandem process, in both English and with the Art & Parks Bike Tour, an Spanish, through partner annual Downtown Alliance event. newsletters, social media Over 250 participants biked to platforms and media requests. the Old Bakery to learn about the “Create a narrative that memorializes the unique past, present and future of Austin and its places and people.” - Community Table Participant on mural vision and themes e c n a i l l A n i t s u A n w o t n w o D : t i d e r C o t o h P | 1 e g a m I e c n a i l l A n i t s u A n w o t n w o D : t i d e r C o t o h P | 2 e g a m I Mural Requirements The Old Bakery is a city and state recognized landmark and is a contributing building to the Congress Avenue Historic District. To ensure the projects respects the historic nature of the bakery, the project team coordinated with the city’s Architectural Review Committee and the state’s Historical Landmark Commission through project briefings and on- site meetings. Before mural installation, the project will undergo a permitting process to follow the guidance of the commissioners and committee members to honor, protect and preserve the historic nature of the building. Survey Participation* 1% Native Hawaiian/Pacific Islander 3% Not Listed / Other 3% American Indian/Alaska Native 4% Black or African-American 4% Asian or Asian American I S C H P A R G O M E D P U O R G E G A N I T S U A N I S R A E Y 15% Latina/o or Hispanic 70% White 19% 25-34 years 24% 35-44 years 21% 45-54 years 20% 55-64 years 13% 65-74 years 3% 75+ years 2% Never lived in Austin 13% Less than 5 years 15% 5-10 Years 21% 11-20 years 22% 21-30 years 27% More than 30 years OLD BAKERY & EMPORIUM | 5 e c n a i l l A n i t s u A n w o t n w o D : t i d e r C o t o h P | 3 e g a m I e c n a i l l A n i t s u A n w o t n w o D : t i d e r C o t o h P | 4 e g a m I e c n a i l l A n i t s u A n w o t n w o D : t i d e r C o t o h P | 5 e g a m I *Note: Of the 1,000+ community members engaged in the visioning process, approximately 140 individuals opted-in to provide their demographic information. While the charts above are not all-inclusive, it is reflective of a small sample of people engaged during the process. l e w o r k o f f o l k s w h o ’ v e “ A t i m a d e A u s t i n w e l c o m i n g ” - Survey Participant on mural vision and themes e c n a i l l A n i t s u A n w o t n w o D : t i d e r C o t o h P | 6 e g a m I 6 | WRITING ON THE WALLS WHAT WE HEARD Across multiple engagement platforms and outreach efforts, there is consistent alignment to honor the Indigenous ancestry of the land, uplift the bakery’s Swedish heritage and celebrate the central Texas landscape. While there are several more nuanced and specific mural concepts (visualized in the word cloud below), these themes can be integrated and intersected into the mural design. The public provided input on the potential significance the mural as well as the aesthetic style for the art. Overall, the community wants to see art that is iconic, accessible and reflective of Austin’s values in a style that is both vibrant and graphic to energize the park. Additionally programming such as performances and events Mural Style GRAPHIC MUTED SURREAL WRITTEN VIBRANT TOPICAL 85% 56% 54% 48% 39% 52% 51% 48% 45% can activate the space. REALISTIC ABSTRACT Mural Themes Priorities in Art & Public Space Art Public Space W NO POLITICS O N & N E H T I I I ’ G N N I L D E R & N A L P 8 2 9 1 E H T R E H T E G O T D A E R B S E I R O T S S N E M O W AIPP STORIES EARLY AUSTIN SETTLERS S E I R O T S WATER OLD AUSTIN + G N A K Q A E T R B B G L PAST & PRESENT INDIGENOUS STORIES L AUSTIN’S A HISTORY C ARCHITECTURAL HISTORY O KEEP IT WEIRD L MULTI- CULTURAL HISTORY OF THE CAPITOL SWEDISH BLACK STORIES STORIES OLD BAKERY’S HISTORY AUSTIN’S LANDSCAPE IMMIGRATION MINORITIES AUSTIN’S FUTURE S E I R O T S R E V R O D A R O L O C LATINX STORIES BAKERY & BREAD I S E I G O L O C E E V I T A N Accessible for all Icon for the Region Reflects values Educates viewers Sitting / Relaxing Performances Events / Activations Food / Dining Socializing Education / Learning Games / Playing Addresses issues 28% Interactive 20% Other 13% 28% 25% 0% 50% 100% OLD BAKERY & EMPORIUM | 7 The Rotating Mural Wall Throughout engagement, multiple themes and histories This Engagement & Vision Report will be the for the mural design arose. To accommodate and cornerstone of mural iterations, setting the stage for provide space for these stories, the community’s input a series of murals, each of which are grounded in the recommends a Rotating Mural Wall program, where community’s input and vision for the mural wall. While a new mural, pending funding resources and partner the first mural secured funding and partner support, support, is curated every three to five years to uplift each subsequent mural iteration will need to go and connect multiple stories over a fifteeen year mural through a new curation, outlined below, to uphold the installation period. engagement process. Identify funding and Open a call for Acquire state and Engage with the partners for a new artists with a city permits for community on the mural installation. community theme. mural installation. new mural design. THE MURAL VISION The Rotating Mural Wall honors the past, present and future of the Old Bakery by celebrating the diverse stories of the individuals and communities that have shared Austin’s history. GUIDING THEMES Honor the traditional territories and homelands of the Indigenous peoples. Intersect the multi-cultural stories that shared space with the Old Bakery. Celebrate the Swedish culture and immigrant history of the bakery. Uplift positive and welcoming stories of locals (musicans, activists, etc). Respect the local geography through the native flora, fauna and wildlife. Bring together the then and now through an intergenerational lens. DOWNTOWN AUSTIN WRITING ON THE WALLS AUSTINPARKS.ORG AUSTINTEXAS.GOV/DEPARTMENT/ PARKS-AND-RECREATION AUSTINTEXAS.GOV/DEPARTMENT/ OLD-BAKERY-AND-EMPORIUM DOWNTOWNAUSTIN.COM