B.8.3 - 510 Baylor St - Raymond-Morley - lighting — original pdf

Backup

WPX LED Wall Packs Catalog Number Notes Type Specifications u w D ---- L :::c: <( B Front View Side View Luminaire Height (H) Width (W) Depth (D) WPX1 WPX2 WPX3 8.1” (20.6 cm) 9.1” (23.1 cm) 9.5” (24.1 cm) 11.1” (28.3 cm) 12.3” (31.1 cm) 13.0” (33.0 cm) 3.2” (8.1 cm) 4.1” (10.5 cm) 5.5” (13.7 cm) Side Conduit Location A 4.0” (10.3 cm) 4.5” (11.5 cm) 4.7” (12.0 cm) B 0.6” (1.6 cm) 0.7” (1.7 cm) 0.7” (1.7 cm) Weight 6.1 lbs (2.8kg) 8.2 lbs (3.7kg) 11.0 lbs (5.0kg) Hit the Tab key or mouse over the page to see all interactive elements. Introduction The WPX LED wall packs are energy-efficient, cost- effective, and aesthetically appealing solutions for both HID wall pack replacement and new construction opportunities. Available in three sizes, the WPX family delivers 1,550 to 9,200 lumens with a wide, uniform distribution. The WPX full cut-off solutions fully cover the footprint of the HID glass wall packs that they replace, providing a neat installation and an upgraded appearance. Reliable IP66 construction and excellent LED lumen maintenance ensure a long service life. Photocell and emergency egress battery options make WPX ideal for every wall mounted lighting application. Ordering Information EXAMPLE: WPX2 LED 40K MVOLT DDBXD Series WPX1 LED P1 WPX1 LED P2 WPX2 LED WPX3 LED Color Temperature Voltage Options Finish 1,550 Lumens, 11W 1 2,900 Lumens, 24W 6,000 Lumens, 47W 9,200 Lumens, 69W 30K 40K 50K 3000K 4000K 5000K MVOLT 347 120V - 277V 347V 3 (blank) E4WH E14WC PE None Emergency battery backup, CEC compliant (4W, 0ºC min) 2 Emergency battery backup, CEC compliant (14W, -20ºC min) 2 Photocell 3 Dark bronze DDBXD DWHXD White Black DBLXD Note : For other options, consult factory. Note: The lumen output and input power shown in the ordering tree are average representations of all configuration options. Specific values are available on request. NOTES 1. All WPX wall packs come with 6kV surge protection standard, except WPX1 LED P1 package which comes with 2.5kV surge protection standard. Add SPD6KV option to get WPX1 LED P1 with 6kV surge protection. Sample nomenclature: WPX1 LED P1 40K MVOLT SPD6KV DDBXD 2. Battery pack options only available on WPX1 and WPX2. 3. Battery pack options not available with 347V and PE options. FEATURES & SPECIFICATIONS INTENDED USE The WPX LED wall packs are designed to provide a cost-effective, energy-efficient solution for the one-for-one replacement of existing HID wall packs. The WPX1, WPX2 and WPX3 are ideal for replacing up to 150W, 250W, and 400W HID luminaires respectively. WPX luminaires deliver a uniform, wide distribution. WPX is rated for -40ºC to 40ºC. CONSTRUCTION WPX feature a die-cast aluminum main body with optimal thermal management that both enhances LED efficacy and extends component life. The luminaires are IP66 rated, and sealed against moisture or environmental contaminants. ELECTRICAL Light engine(s) configurations consist of high-efficacy LEDs and LED lumen maintenance of L90/100,000 hours. Color temperature (CCT) options of 3000K, 4000K and 5000K with minimum CRI of 70. Electronic drivers ensure system power factor >90% and THD <20%. All luminaires have 6kV surge protection (Note: WPX1 LED P1 package comes with a standard surge protection rating of 2.5kV. It can be ordered with an optional 6kV surge protection). All photocell (PE) operate on MVOLT (120V - 277V) input. Note: The standard WPX LED wall pack luminaires come with field-adjustable drive current feature. This feature allows tuning the output current of the LED drivers to adjust the lumen output (to dim the luminaire). INSTALLATION WPX can be mounted directly over a standard electrical junction box. Three 1/2 inch conduit ports on three sides allow for surface conduit wiring. A port on the back surface allows poke-through conduit wiring on surfaces that don't have an electrical junction box. Wiring can be made in the integral wiring compartment in all cases. WPX is only recommended for installations with LEDs facing downwards. LISTINGS CSA Certified to meet U.S. and Canadian standards. Suitable for wet locations. IP66 Rated. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified. International Dark Sky Association (IDA) Fixture Seal of Approval (FSA) is available for all products on this page utilizing 3000K color temperature only. WARRANTY 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx. Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25°C. Specifications subject to change without notice. One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2020-2022 Acuity Brands Lighting, Inc. All rights reserved. WPX LED Rev. 03/08/22 COMMERCIAL OUTDOORPerformance Data Electrical Load Luminaire Input Power (W) 120V 208V 240V 277V 347V WPX1 LED P1 WPX1 LED P2 WPX2 WPX3 11W 24W 47W 69W 0.09 0.20 0.39 0.58 0.05 0.12 0.23 0.33 0.05 0.10 0.20 0.29 0.04 0.09 0.17 0.25 0.03 0.07 0.14 0.20 Projected LED Lumen Maintenance Data references the extrapolated performance projections in a 25°C ambient, based on 6,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11). To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. Operating Hours Lumen Maintenance Factor 50,000 >0.94 75,000 >0.92 100,000 >0.90 HID Replacement Guide Luminaire Equivalent HID Lamp WPX Input Power WPX1 LED P1 WPX1 LED P2 WPX2 WPX3 100W 150W 250W 400W 11W 24W 47W 69W Lumen Output Luminaire Color Temperature Lumen Output WPX1 LED P1 WPX1 LED P2 WPX2 WPX3 3000K 4000K 5000K 3000K 4000K 5000K 3000K 4000K 5000K 3000K 4000K 5000K 1,537 1,568 1,602 2,748 2,912 2,954 5,719 5,896 6,201 8,984 9,269 9,393 Lumen Ambient Temperature (LAT) Multipliers Use these factors to determine relative lumen output for average ambient temperatures from 0-50°C (32-122°F). Ambient Ambient Lumen Multiplier 0°C 5°C 10°C 15°C 20°C 25°C 30°C 35°C 40°C 32°F 41°F 50°F 59°F 68°F 77°F 86°F 95°F 104°F 1.05 1.04 1.03 1.02 1.01 1.00 0.99 0.98 0.97 Emergency Egress Battery Packs The emergency battery backup is integral to the luminaire — no external housing or back box is required. The emergency battery will power the luminaire for a minimum duration of 90 minutes and deliver minimum initial output of 550 lumens. Both battery pack options are CEC compliant. Battery Type Standard Cold Weather Minimum Temperature Rating Power (Watts) Controls Option Ordering Example 0°C -20°C 4W 14W E4WH E14WC WPX2 LED 40K MVOLT E4WH DDBXD WPX2 LED 40K MVOLT E14WC DDBXD Template Print Page 1 of 1 Template Print Page 1 of 1 Photometric Diagrams Visual - Template Tool Design Information Project Description LEGEND WPX1 LED P1 Name Company Phone Email To see complete photometric reports or download .ies files for this product, visit the Lithonia Lighting WPX LED homepage. Tested in accordance with IESNA LM-79 and LM-80 standards Design Information Project Description Visual - Template Tool Wednesday, April 15, 2020 Wednesday, April 15, 2020 WPX1 LED P2 Name Company Phone Email 0.1 fc 0.2 fc 0.5 fc 1.0 fc Template Print Page 1 of 1 Template Print Page 1 of 1 Visual - Template Tool Design Information Project Description WPX2 LED Name Company Phone Email Visual - Template Tool Design Information Project Description WPX3 LED Wednesday, April 15, 2020 Wednesday, April 15, 2020 Name Company Phone Email Mounting Height = 12 Feet. [ A ] - WPX1 LED P1 40K Mvolt [ B ] - WPX1 LED P2 30K Mvolt Manufacturer Lamp Lumens Lamp Quantity Light Loss Factor Input Power Max Illuminance Lithonia Lighting Configuration 1568 Orientation 1 Mounting Height 1 Arm Length 11 Tilt 3 Area > 0.5fc Single Single 12 1 0 844 Manufacturer Lamp Lumens Lamp Quantity Light Loss Factor Input Power Max Illuminance Lithonia Lighting Configuration 2748 Orientation 1 Mounting Height 1 Arm Length 24 Tilt 5 Area > 0.5fc Single Single 12 1 0 1344 These lighting calculation results are for general informational purposes only and are provided without warranty as to accuracy, completeness, reliability or otherwise. Results are based on user provided data and data provided from publicly available sources; actual field conditions may affect calculated output. Visit www.Visual-3D.com . These lighting calculation results are for general informational purposes only and are provided without warranty as to accuracy, completeness, reliability or otherwise. Results are based on user provided data and data provided from publicly available sources; actual field conditions may affect calculated output. Visit www.Visual-3D.com . https://www.visual-3d.com/tools/template/Print.aspx?SessionID=7379918 4/15/2020 https://www.visual-3d.com/tools/template/Print.aspx?SessionID=7379918 4/15/2020 [ C ] - WPX2 LED 40K Mvolt [ D ] - WPX3 LED 40K Mvolt Manufacturer Lamp Lumens Lamp Quantity Light Loss Factor Input Power Max Illuminance Lithonia Lighting Configuration Single Manufacturer Lithonia Lighting Configuration One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com 9269 Orientation 5895 Orientation Lamp Lumens Single Single 1 Mounting Height 12 Lamp Quantity © 2020-2022 Acuity Brands Lighting, Inc. All rights reserved. Light Loss Factor 1 Arm Length 1 47.8 Tilt 11 Area > 0.5fc 0 1825 Input Power Max Illuminance 1 Mounting Height 1 Arm Length 69 Tilt 17 Area > 0.5fc Single 12 1 0 2556 These lighting calculation results are for general informational purposes only and are provided without warranty as to accuracy, completeness, reliability or otherwise. Results are based on user provided data and data provided from publicly available sources; actual field conditions may affect calculated output. Visit www.Visual-3D.com . These lighting calculation results are for general informational purposes only and are provided without warranty as to accuracy, completeness, reliability or otherwise. Results are based on user provided data and data provided from publicly available sources; actual field conditions may affect calculated output. Visit www.Visual-3D.com . WPX LED Rev. 03/08/22 https://www.visual-3d.com/tools/template/Print.aspx?SessionID=7379918 4/15/2020 https://www.visual-3d.com/tools/template/Print.aspx?SessionID=7379918 4/15/2020 COMMERCIAL OUTDOOR